[1] ANTHONY M J, SHAH R K. Air-side flow and heat transfer in compact heat exchangers:A discussion of enhancement mechanisms[J]. Heat Transfer engineering,1998, 19(4):29-41. [2] SONG K W, WANG Y, WANG L B, et al. Numerical study of the fin efficiency and a modified fin efficiency formula for flat tube bank fin heat exchanger[J]. International Journal of Heat and Mass Transfer, 2011, 54(11):2661-2672. [3] WANG L B, LIN Z M, SUN K J, et al. Transversal tube pitch effects on local heat transfer characteristics of the flat tube bank fin mounted vortex generators and their sensitivity to non-uniform temperature of the fin[J]. Frontiers of Energy and Power Engineering in China, 2010, 4(3):333-345. [4] HU W L, WANG L B. The effect of transverse tube pitch on the thermal-hydrodynamic performance of a circular tube-plate-fin heat exchanger with fin-mounted vortex generators[J]. Journal of Enhanced Heat Transfer, 2015, 22(3):221-246. [5] HU W L, SU M, WANG L B, et al. The optimum fin spacing of circle tube bank fin heat exchanger with vortex generators under the same front velocity[J]. Heat Mass Transfer, 2013, 49:1271-1285. [6] LIZARDI J J, TREVINO C, MENDEZ F. The influence of the variable thermal conductivity of a vertical fin on a laminar-film condensation process[J]. Heat and Mass Transfer, 2004, 40:383-391. [7] GAI X P, WANG L B, LIN Z M, et al. Effects of the fins conductivity on heat transfer performance of the bank plain fin heat exchangers[J]. Journal of Lanzhou Jiaotong University, 2010, 29(3):55-61. [8] HAN H, HE Y L, LI Y S, et al. A numerical study on compact enhanced fin-and-tube heat exchangers with oval and circular tube configurations[J]. International Journal of Heat Mass Transfer, 2013, 65:686-695. [9] ARORA A, SUBBARAO P M V, AGARWAL R S. Numerical optimization of location of ‘common flow up’ delta winglets for inline aligned finned tube heat exchangers[J]. Applied Thermal Engineering, 2015, 82:329-340. [10] WEI X Q, ZHANG Y H, WANG L B, et al. The fluid flow and heat transfer characteristics in the channel formed by flat tube and dimpled fin[J]. International Journal of Thermal Sciences, 2016, 104:86-100. [11] LIN Z M, LIU C P, WANG L B. Numerical study of fluid flow and heat transfer enhancement of circular tube bank fin heat exchanger with curved delta-winglet vortex generators[J]. Applied Thermal Engineering, 2015, 88:198-210. [12] LIN Z M, WANG L B, ZHANG Y H. Numerical study on heat transfer enhancement of circular tube bank fin heat exchanger with interrupted annular groove fin[J]. Applied Thermal Engineering, 2014, 73:1465-1476. [13] LIU C P, LIN Z M, WANG L B. The thermal boundary conditions on the cross sections normal to the main flow of fully developed convection in the tube with insert tape[J]. Numerical Heat Transfer A, 2014, 65:1230-1253. [14] WANG Y, WANG L C, WANG L B, et al. The condition requiring conjugate numerical method in study of heat transfer characteristics of tube bank fin heat exchanger[J]. International Journal of Heat Mass Transfer, 2012, 55:2353-2364. [15] WANG Y, YU B, SUN S Y. POD-Galerkin model for incompressible single-phase flow in porous media[J]. Open Phys, 2016, 14:1-14. [16] HAN D X. Study on a BFC-based POD-Galerkin reduced-order model for the unsteady-state variable property heat transfer problem[J]. Numerical Heat Transfer, 2014(65):256-281. [17] HAN D X. Fast thermal simulation of a heated crude oil pipeline with a BFC-based POD reduced-order model[J]. Applied Thermal Engineering, 2015(88):217-229. [18] DING P, TAO W Q. Reduced order modeling of fluid flow and heat transfer in tube-fin heat exchanger[J]. Journal of China University of Petroleum, 2011, 35(2):137-140. [19] CHEN J J, HAN D X, WANG Y, et al. POD reduced order model based on vorticity-stream function equations[J]. Journal of Engineering Thermophysics, 2016, 37(10):2167-2174. [20] SUN J C, DU P, LI P S. Natural convection heat transfer in a porous medium with partially thermally active walls:Lattice Boltzmann method[J]. Chinese Journal of Computational Physics, 2017, 34(5):583-592. [21] LI Z H, SUN H F, XIA X L. Decoupling method for transient thermal status of low supersonic aircrafts[J]. Chinese Journal of Computational Physics, 2016, 33(6):681-690. [22] SIROVICH L. Turbulent and dynamics of coherent structure:I-Ⅲ[J]. Quarterly of Applied Mathematics, 1987, 45:561-590. [23] KYLIKOF U. The cooling system of diesel locomotive[M]. Moscow:Machine Construction Press, 1988. [24] WANG Y, YU B, CAO Z Z. A comparative study of POD interpolation and POD projection methods for fast and accurate prediction of heat transfer problems[J]. International Journal of Heat and Mass Transfer, 2012, 55(17-18):4827-4836. [25] WANG Y, WANG L B. Influence of fin material on the conjugate heat transfer characteristics of flat tube bank fin heat exchanger[J]. Journal of Basic Science and Engineering, 2017,25(4):824-834. |