计算物理 ›› 2001, Vol. 18 ›› Issue (4): 318-324.

• 论文 • 上一篇    下一篇

多块网格技术及其在操纵面绕流计算中的应用

陈海昕1, 李凤蔚2, 鄂秦2, 沈孟育1   

  1. 1. 清华大学工程力学系, 北京 100084;
    2. 西北工业大学飞机工程系, 陕西 西安 710072
  • 收稿日期:2000-05-08 修回日期:2000-10-16 出版日期:2001-07-25 发布日期:2001-07-25
  • 作者简介:陈海昕(1974-),男,湖南隆回,博士后,主要从事计算流体力学方向的研究.

APPLICATION OF MULTI-BLOCK GRID TECHNOLOGY IN NUMERICAL SIMULATION OF FLOW FIELD ABOUT AERODYNAMICS CONTROL SURFACE

CHEN Hai-xin1, LI Feng-wei2, E Qin2, SHEN Meng-yu1   

  1. 1. Department of Engineering Mechanics, Tsinghua University, Beijing 100084, P R China;
    2. Department of Aircraft Engineering, Northwestern Polytechnical University, Xi'an 710072, P R China
  • Received:2000-05-08 Revised:2000-10-16 Online:2001-07-25 Published:2001-07-25

摘要: 采用中心有限体积法求解Navier Stokes方程组,利用点对点搭接及面搭接多块网格技术成功地进行了多段翼型和存在外形间断(剪刀差)的带操纵面三维机翼的网格生成及粘性绕流流场数值计算,使用重叠面积加权插值及Ramshaw算法实现了面搭接的多块网格之间的信息传递并保证了通量守恒,并将流场计算结果与实验数据进行了对比.

关键词: 多块网格, 点对点搭接, 面搭接, 多段翼型, 操纵面

Abstract: Because of the complexities in both configurations and flow phenomena,there are great difficulties in the numerical simulation of flow about wing with lift-enhancing devices and control surfaces.By using cell-centered finite volume method,it deals with Renolds-averaged Navier-Stokes equations on multi-block structural grids generated by elliptic method.Two kinds of patching schemes,point-to-point and patch-on-common-surface,are employed to establish the information exchange among blocks.In the later one,the overlap cell area weighted interpolation is used to guarantee the conservation.Ramshaw algorithm is also used to pre-determine the overlap areas.Flow fields about multi-element airfoils and delta wing with deflected flap are computed with the present method.Numerical results are all in good agreement with experiment data.Flow field visualization shows the present method has good resolution in flow details.

Key words: multi-block grid, point-to-point patch, surface patch, multi-element airfoil, control surface

中图分类号: