计算物理 ›› 2013, Vol. 30 ›› Issue (4): 541-546.

• 论文 • 上一篇    下一篇

基于修正Linde模型的复材层板的损伤模拟

赵士洋1, 薛璞1,2, 朱杰1   

  1. 1. 西北工业大学航空学院, 西安 710072;
    2. 北京理工大学爆炸科学与技术国家重点实验室, 北京 100081
  • 收稿日期:2012-09-27 修回日期:2012-12-04 出版日期:2013-07-25 发布日期:2013-07-25
  • 作者简介:赵士洋(1986-),男,西安,博士生,主要从事复合材料损伤研究,E-mail:840208927@qq.com
  • 基金资助:
    国家自然科学基金(11072202);爆炸科学与技术国家重点实验室基金(KFJJ12-20M)资助项目

A Modified Linde Model for Damage in Composite Laminates

ZHAO Shiyang1, XUE Pu1,2, ZHU Jie1   

  1. 1. Northwestern Polytechnical University, School of Aeronautics, Xi'an 710072, China;
    2. State Key Laboratory of Explosion Science and Technology, Beijing 100081, China
  • Received:2012-09-27 Revised:2012-12-04 Online:2013-07-25 Published:2013-07-25

摘要: 基于连续损伤力学方法,建立含初始损伤的三维复合材料层合板的有限元模型.采用Linde等提出的应变失效准则,并引入参数对损伤函数进行修正,模拟层合板的纤维和基体的失效行为.参数的改变可以描述损伤变量随应变的变化程度.数值模拟表明,计算结果随着参数的变化幅度较大,在试验值的±15%范围内变动.本文引入的参数一方面可以拓宽Linde材料损伤判据的适用范围,另一方面在适用范围内可以达到更为精确的数值模拟结果,为后续的结构分析打下基础.

关键词: 连续损伤, Linde材料模型, 修正参数, 复合材料层合板

Abstract: A finite element model of a three-dimensional composite laminate with initial damage is established with continuum damage mechanics.With strain failure criterion proposed by Linde and a parameter modifying damage function,failure behavior of matrix and fiber in laminates is simulated.Damage variable's variation with deformation can be achieved by changing of the parameter.Numerical results vary obviously with the parameter.Examples demonstrate that the parameter can reduce error,and make simulation agree with experiment result.The induced parameter can extend application of the Linde model and increase precision of simulation.

Key words: continuum damage, Linde material model, modified parameter, composite laminates

中图分类号: