基于面向对象方法的多源环状管网水力计算

计算物理 ›› 2012, Vol. 29 ›› Issue (5): 713-720.

基于面向对象方法的多源环状管网水力计算

王海¹, 王海鹰¹, 朱彤¹, 周海珠²

1. 同济大学机械与能源工程学院, 上海 200092;
2. 中国建筑科学研究院天津分院, 天津 300834

收稿日期:2011-10-12 修回日期:2012-02-10 出版日期:2012-09-25 发布日期:2012-09-25
通讯作者: 海鹰,E-mail:haiyingw@tongji.edu.cn
作者简介:王海(1976-),男,博士,讲师,从事过程控制、供热、供燃气管网、低品位能源利用的教学科研工作,E-mail:waltghai@tongji,edu.cn
基金资助:
高等学校博士学科点专项科研基金(20090072120031);同济大学青年优秀人才培养行动计划(2009KJ051)资助项目

Calculation of Multi-source Looped--pipe Networks Based on Object-oriented Method

WANG Hai¹, WANG Haiying¹, ZHU Tong¹, ZHOU Haizhu²

1. College of Mechanical Engineering, Tongji University, Shanghai 200092, China;
2. Tianjin Institude of China Academy of Building Research, Tianjin 300834, China

Received:2011-10-12 Revised:2012-02-10 Online:2012-09-25 Published:2012-09-25

摘要/Abstract

摘要： 提出一种基于面向对象的方法,以元件的对象属性表达管网的拓扑结构,以对象方法表达水力计算模型,用对象事件反映边界条件变化响应的方法,然后通过遍历整个管网元件对象进行水力计算.对工程中两种常见的多源管网结构进行计算,分析表明,新方法能有效地处理多源环状管网结构、源变化引发的水力平衡问题,计算偏差小,能够充分满足工程计算的需求.

关键词: 环状管网, 多源, 水力计算, 面向对象

Abstract: An algorithm based on object-oriented(00) method is proposed.All pipe components in network topology structure are given special object,properties.Hydraulic calculation models are expressed by object methods.Boundary conditions variations are reflected by object events.Then hydraulic calculation can be solved as traversing all pipe components.Two cases are calculated and analyzed.It indicates that the method can effectively handle hydraulic imbalance caused in structure or in heat sources of a multi-source looped-pipe network with small deviations.

Key words: loop pipeline network, multiple sources, hydraulic computation, object oriented

中图分类号:

TV134.4

王海, 王海鹰, 朱彤, 周海珠. 基于面向对象方法的多源环状管网水力计算[J]. 计算物理, 2012, 29(5): 713-720.

WANG Hai, WANG Haiying, ZHU Tong, ZHOU Haizhu. Calculation of Multi-source Looped--pipe Networks Based on Object-oriented Method[J]. CHINESE JOURNAL OF COMPUTATIONAL PHYSICS, 2012, 29(5): 713-720.