计算物理 ›› 2008, Vol. 25 ›› Issue (2): 133-138.

• 研究论文 • 上一篇    下一篇

Euler多物质流体动力学数值方法中的界面处理算法

马天宝1, 郝莉2, 宁建国1   

  1. 1. 北京理工大学爆炸科学与技术国家重点实验室, 北京 100081;
    2. 北京建筑工程学院基础部, 北京 100044
  • 收稿日期:2006-11-27 修回日期:2007-04-17 出版日期:2008-03-25 发布日期:2008-03-25
  • 作者简介:马天宝(198l-),男,黑龙江绥化,讲师,从事计算爆炸力学方面的研究.
  • 基金资助:
    国家自然科学基金(10625208,10572018)资助项目

Interface Reconstruction Algorithm in Eulerian Multi-material Hydrodynamic Numerical Method

MA Tianbao1, HAO Li2, NING Jianguo1   

  1. 1. State Key Laboratory of Explosion Science and Technology, Beijing Institute of Technology, Beijing 100081, China;
    2. Beijing Institute of Civil Engineering and Architecture, Beijing 100044, China
  • Received:2006-11-27 Revised:2007-04-17 Online:2008-03-25 Published:2008-03-25

摘要: 结合Euler型多物质流体动力学数值方法,将Youngs界面重构技术进行改进,改进后的算法中,混合网格周围网格物质的体积份额不但被用来计算物质界面的位置,还被用来确定混合网格中各物质的输运次序.将改进后的算法加入到自行开发的MMIC-2D通用多物质二维爆炸与冲击问题数值仿真程序中,对二维直角坐标系下圆环在平移流场中的运动过程进行模拟,以此对提出的改进界面处理算法进行数值考核.在此基础上,对聚能装药射流的形成过程进行数值模拟,模拟结果图像显示,其物质分界面清晰,并与实验结果吻合较好,从而验证了该方法的精度及有效性.

关键词: Euler方法, 改进Youngs技术, 聚能射流

Abstract: We develop a modified Youngs interface reconstruction algorithm for Eulerian muhi-material hydrodynamic numerical methods. In the algorithm, the material's volume fractions of surrounding cells are used not only to calculate position of the interface but also to determine the transportation priority of materials. In a two dimensional muhi-material Eulerian hydrocode MMIC-2D, the algorithm is employed and validated in simulation of a cirque moving in a translational flow field in two dimensional Descartes coordinates. In the simulation of jet formation of shaped charge, material interfaces are clearly shown and agree well with experimental resuhs. It demonstrates accuracy and efficiency of the modified Youngs interface reconstruction algorithm.

Key words: Eulerian method, modified Youngs algorithm, shaped charge jet

中图分类号: