过渡金属Cu、Cr掺杂TiO2表面氧化性气体NO2光学气敏传感特性

doi:10.19596/j.cnki.1001-246x.7777

计算物理 ›› 2018, Vol. 35 ›› Issue (6): 702-710.DOI: 10.19596/j.cnki.1001-246x.7777

过渡金属Cu、Cr掺杂TiO₂表面氧化性气体NO₂光学气敏传感特性

周康^1,2, 冯庆^1,2, 田芸¹, 李科¹, 周清斌¹

1. 重庆师范大学光学工程重点实验室, 重庆 400047;
2. 重庆市光电功能材料重点实验室, 重庆 401331

收稿日期:2017-09-29 修回日期:2018-01-20 出版日期:2018-11-25 发布日期:2018-11-25
通讯作者: 冯庆(1978-),男,博士,教授,硕士生导师,主要从事半导体功能材料研究,E-mail:fengq_126@163.com
作者简介:周康(1991-),男,硕士研究生,主要从事金属氧化物半导体研究,E-mail:zhoukang127@foxmail.com
基金资助:
国家自然科学基金（61274128）及重庆市自然科学基金（2014jcyjA50015）资助项目

Oxidizing Gas NO₂ Optical Gas Sensing Characteristics of Transition Metal Cu and Cr Doped TiO₂ Surfaces

ZHOU Kang^1,2, FENG Qing^1,2, TIAN Yun¹, LI Ke¹, ZHOU Qingbin¹

1. Key Laboratory of Optics and Engineering, Chongqing Normal University, Chongqing 400047, China;
2. Chongqing Laboratory on Optoelectronic Functional Materials, Chongqing, 401331, China

Received:2017-09-29 Revised:2018-01-20 Online:2018-11-25 Published:2018-11-25

摘要/Abstract

摘要： 采用密度泛函理论（DFT）体系广义梯度近似（GGA）第一性原理平面波超软赝势方法，分析锐钛矿型TiO₂（101）表面吸附NO₂分子光学气敏传感的微观机理.结果表明：Cu和Cr原子易于掺入TiO₂（101）表面，掺杂表面能稳定地吸附NO₂分子且吸附后光学性质发生显著变化.表面吸附NO₂分子后，Cu掺杂TiO₂（101）表面对分子的吸附能最大，吸附后结构更稳定，分子与表面的距离最短.通过分析差分电荷密度和电荷布居数发现，NO₂分子与基底表面间发生电荷转移，转移电子数目：Cu掺杂表面 > Cr掺杂表面 > 无掺杂表面.对比吸收光谱和反射光谱发现，在Cu掺杂表面吸附分子后，光学性质变化最明显，说明表面与吸附分子间氧化还原能力是决定光学气敏传感性能的核心因素.在过渡金属中，Cu与Cr都有4s价电子结构，其4s电子降低了材料表面氧空位的氧化性，增加了其还原性.对于氧化性气体，可以提升表面与分子的氧化还原作用，而Cu的4s电子更加活泼，从而光学气敏传感特性更加明显.因此，Cu掺杂的TiO₂对氧化性气体是一种较好的光学气敏传感材料.

关键词: 光学性质, 锐钛矿TiO₂, NO₂分子, 密度泛函理论

Abstract: With first-principles plane-wave ultrasoft pseudopotential method based on density functional(DFT) system, we analyze properties of optical gas sensor materials anatase TiO₂(101) surfaces with NO₂ adsorption. Cu and Cr atoms are easily doped on TiO₂(101) surface. Cu and Cr doped TiO₂(101) surfaces could absorbed NO₂ molecules steadily. After adsorption, material optical properties changed obviously. Cu doped TiO₂(101) surfaces have the highest adsorption energy and the shortest distance between surface and molecule. Analyzing charge density difference and charge population we found that charge transfer occurs between NO₂ molecule and material surface. Electron transfer number is as follows:Cu-doped surface > Cr-doped surface > Undoped surface. Comparing absorption and reflection spectra we found that Cu-doped surface optical properties changed obviously. Redox capacity between surfaces and molecules decided optical gas sensing propertiess. Cu and Cr has 4s valence electron structure which could reduce materials oxygen vacancies oxidative properties. For oxidizing gases, 4s electron could increase surfaces and molecules redox effect. Cu 4s electron is more active. It indicates that Cu doped TiO₂ is a good optical gas sensor material for oxidizing gases.

Key words: optical properties, anatase TiO₂, NO₂, density functional theory

中图分类号:

周康, 冯庆, 田芸, 李科, 周清斌. 过渡金属Cu、Cr掺杂TiO₂表面氧化性气体NO₂光学气敏传感特性[J]. 计算物理, 2018, 35(6): 702-710.

ZHOU Kang, FENG Qing, TIAN Yun, LI Ke, ZHOU Qingbin. Oxidizing Gas NO₂ Optical Gas Sensing Characteristics of Transition Metal Cu and Cr Doped TiO₂ Surfaces[J]. CHINESE JOURNAL OF COMPUTATIONAL PHYSICS, 2018, 35(6): 702-710.

参考文献

[1] LEE H U, LEE S C, CHOI S H, et al. Highly visible-light active nanoporous TiO₂ photocatalysts for efficient solar photocatalytic applications[J]. Applied Catalysis B:Environmental, 2013, 129:106-113.
[2] FENG Q, YUE Y X, WANG Y, et al. Study on optical and electronic properties of Mn-N co-doped anatase titanium dioxide[J]. Laser & Optoelectronics Progress, 2013, 50:061601.
[3] LIN Y, ZHOU X W, XIAO X R, et al. Research progress of solid state dye-sensitized TiO₂ nanocrystalline thin film solar cells[J]. Science & Technology Review, 2006, 216(24):11-14.
[4] YANG J Y, CHEN X Q, ZHANG J S, et al. Study on application of nanometer TiO₂ as photocatalyst in the field of environmental protection new progress[J]. Fine Chemical Intermediates, 2002, 32(6):5-9.
[5] ZHANG Q H. Titanium dioxide nano materials and its research progress in clean energy technology[J]. Journal of Inorganic Materials, 2012, 27(1):1-10.
[6] LI Y J. The characteristics and application of titanium dioxide in food safety[J]. China Food Safty, 2008, 1010643:58-59.
[7] XU C Y. Application of nano titanium dioxide in sunscreen cosmetics[J]. YuNan Chemical Technology, 2014, 31(3):36-38.
[8] CUI W Y, LIU Z Z, JIANG Y J, et al. Study on trifluoroacetic acid adsorbed on TiO₂ surface with density function theory[J]. Acta Chimica Sinica, 2012, 70:2049-2058.
[9] FENG Q. First principles study on properties of anatase TiO₂ vacancies[J]. Journal of Chongqing Normal University, 2009, 26(1):78-81.
[10] SONG D W, NIU Y, XIAO L O, et al. Structural, electronic and magnetic properties of Mn-doped ZnS(110) surfaces:First-principles study[J]. Chinese Journal of Computational Physics, 2012, 29(2):277-284.
[11] HEBNESTREIT W, RUZYCKI N, HERMAN G S, et al. Scanning tunneling microscopy investigation of the TiO₂ anatase (101) surface[J]. Physical Review B, 2000, 62:334-336.
[12] 柳清. 石墨烯吸附NO₂的第一性原理研究[D]. 北京:北京理工大学, 2016.
[13] CHEN X Y, FENG Q, ZHOU Q. Effect of Cu and non-metal double acceptor impurity level cooperative action on optical properties of anatase TiO₂[J]. Chinese Journal of Computational Physics, 2017, 34(1):99-108.
[14] FENG Q, WANG Y, WANG W H, et al. First-principles study of electronic and optical properties of N-S co-doped rutile TiO₂[J]. Chinese Journal of Computational Physics, 2012, 29(4):593-600.
[15] RIEBOLDT F, BECHSTEIN R, BESENBACHER F, et al. Vicinal rutile TiO₂ surfaces and their interactions with O₂[J]. The Journal of Physical Chemistry C, 2014, 118(7), 3620-3628.
[16] PERDEW J P, RUZSINSZKY A, CSONKA G I, et al. Restoring the density-gradient expansion for exchange in solids and surfaces[J]. Physical Review Letters, 2008, 100(13):136406.
[17] LIU B, GU M, LIU X L, et al. First-principles study of fluorine-doped zinc oxide[J]. Applied Physics Letters, 2010, 97(12):122101-1-122101-3.
[18] YOU H, LIU C J, Ge Q F. Interaction of Pt clusters with the anatase TiO₂(101) surface:A first principles study[J]. The Journal of Physical Chemistry B, 2006, 110(14):7463-7472.
[19] SHEN X C. Semiconductor spectrum and optical properties[M]. 2nd ed. Beijing:Science Press, 1992.

过渡金属Cu、Cr掺杂TiO₂表面氧化性气体NO₂光学气敏传感特性

Oxidizing Gas NO₂ Optical Gas Sensing Characteristics of Transition Metal Cu and Cr Doped TiO₂ Surfaces

RichHTML

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

作者中心

审稿中心

期刊浏览

期刊介绍

[1]	詹泓飞, 蔡振宁, 胡光辉. 基于虚时间演化与谱方法的一类基态Wigner函数计算方法[J]. 计算物理, 2022, 39(6): 651-665.
[2]	罗强, 马智炜, 蒋冠臻, 邹江峰, 邱毅. Ge掺杂AlN电子和光学性质的第一性原理计算[J]. 计算物理, 2022, 39(5): 609-616.
[3]	乃皮赛·吾买尔江, 闫好奎, 布玛丽亚·阿布力米提, 王丹琦, 向梅, 安桓. 外电场下CHBr₃分子的光谱和解离特性[J]. 计算物理, 2022, 39(5): 624-630.
[4]	吉航, 孙仲谋, 周卓彦, 刘玉柱. 外电场对CO分子及离子性质的调制和降解[J]. 计算物理, 2022, 39(3): 327-334.
[5]	高慧, 杨在发, 赵敬芬, 袁慧敏, 刘志娥, 赵显. 第一性原理研究Nb、Sn、Cu、Fe和Cr对Zr (0001)晶面抗疖状腐蚀性能的影响[J]. 计算物理, 2022, 39(1): 101-108.
[6]	柴汝宽, 刘月田, 杨莉, 张艺馨, 辛晶, 马晶. 两种不同极性有机小分子在方解石(104)面吸附的密度泛函研究[J]. 计算物理, 2020, 37(2): 221-230.
[7]	陈余, 邢永明. 静水压力对Al₁₄Mn₂P₁₆磁光性质影响的密度泛函理论研究[J]. 计算物理, 2020, 37(2): 231-239.
[8]	温淑敏, 姚世伟, 赵春旺, 王细军, 李继军. 应变对纤锌矿结构GaN电子结构及光学性质的影响[J]. 计算物理, 2020, 37(1): 119-126.
[9]	尹海峰, 曾春花, 陈文经. 二维二元碳化硅纳米结构的等离激元激发[J]. 计算物理, 2019, 36(5): 603-609.
[10]	何志伟, 张秀荣. (BN)₂₅团簇的结构与性能[J]. 计算物理, 2019, 36(2): 219-224.
[11]	王啸卿, 刘玉柱, 尹文怡, 李金花. 电场作用下溴甲烷的光谱和解离特性[J]. 计算物理, 2018, 35(5): 619-625.
[12]	谢建明, 陈红霞, 庄国策. Mn掺杂(ZnSe)₁₂团簇物性研究[J]. 计算物理, 2018, 35(4): 481-486.
[13]	李大伟, 高云亮, 朱芫江, 李进平. Ga掺杂δ-Pu的密度泛函理论计算[J]. 计算物理, 2018, 35(4): 487-493.
[14]	蔡鲁刚. 畸形钙钛矿DyMnO₃电子结构与光学性质的第一性原理研究[J]. 计算物理, 2018, 35(3): 350-356.
[15]	林艳, 刘芸, 彭清维, 魏晓楠, 唐延林. 基于密度泛函理论的5~10元瓜环结构参数与前线轨道的计算[J]. 计算物理, 2018, 35(2): 221-229.