计算物理 ›› 2008, Vol. 25 ›› Issue (4): 401-406.

• 研究论文 • 上一篇    下一篇

有限远来流非对称碰撞形成射流研究

石艺娜, 秦承森, 冯其京, 杭义洪   

  1. 北京应用物理与计算数学研究所, 北京 100088
  • 收稿日期:2007-03-06 修回日期:2007-11-05 出版日期:2008-07-25 发布日期:2008-07-25
  • 作者简介:石艺娜(1974-),女,山东东营,副研究员,博士生,从事弹塑性流体力学及其数值模拟研究,北京8009信箱15分箱100088.
  • 基金资助:
    中国工程物理研究院科学技术基金重点(2007A09001);NSAF联合重点基金(10676120)资助项目

Asymmetric Jet Formation in Finite-distance Flow Metallic Collisions

SHI Yina, QIN Chengsen, FENG Qijing, HANG Yihong   

  1. Institute of Applied Physics and Computational Mathematics, Beijing 100088, China
  • Received:2007-03-06 Revised:2007-11-05 Online:2008-07-25 Published:2008-07-25

摘要: 研究距离交汇点有限远的两股平面金属来流非对称碰撞的射流形成规律,给出出流厚度和流动方向的理论公式,并采用带有YOUNGS界面处理的高精度欧拉程序进行仿真验证,与KS喷管实验结果比较,符合较好.研究表明:当碰撞角确定时,来流初始位形对杵体的流动状态有重要影响,对细射流的影响不明显.

关键词: 有限远来流, 非对称碰撞, 射流, 解析理论, 数值仿真

Abstract: We study asymmetric jet and slug formation in collision of two plane flows at a finite distance from stagnation point. Analytic expressions for width and flow direction of jet and slug are given on a solution ellipse. The jetting process is simulated with Euler hydrocode of high order precision and YOUNGS algorithm for tracking interfaces. Predictions are more accurate than results of other analytic models and are in agreement with KS experimental data. With increase of asymmetry between incoming flows, flow direction of slug changes considerably, whereas the direction of jet barely deviates from the direction of symmetric bisector of incoming flows.

Key words: incoming flows with an infinite distance from stagnation point, adymmetric collision, jet, analytic theory, numerical simulation

中图分类号: