计算物理 ›› 2008, Vol. 25 ›› Issue (6): 733-743.

• 研究论文 • 上一篇    下一篇

PDF方法模拟钝体驻定的湍流扩散火焰

黄庆1,2, 朱旻明2, 叶桃红2, 刘明侯2, 陈义良2, 董刚3   

  1. 1. 中南大学能源科学与工程学院, 湖南 长沙 410083;
    2. 中国科学技术大学热科学和能源工程系, 安徽 合肥 230027;
    3. 南京理工大学动力工程学院, 江苏 南京 210094
  • 收稿日期:2007-07-09 修回日期:2007-12-10 出版日期:2008-11-25 发布日期:2008-11-25
  • 作者简介:黄庆(1975-),男,湖南邵阳,博士,从事计算流体力学和湍流燃烧研究.
  • 基金资助:
    国家自然科学基金(50506028)资助项目

PDF Simulation of Bluff-body Stabilized Turbulent Non-premixed Flame

HUANG Qing1,2, ZHU Minming2, YE Taohong2, LIU Minghou2, CHEN Yiliang2, DONG Gang3   

  1. 1. School of Energy Science and Engineering, Central South University, Changsha 410083, China;
    2. Thermal Science and Energy Engineering Department, University of Science and Technology of China, Hefei 230027, China;
    3. Institute of Power Engineering, Nanjing University of Science and Technology, Nanjing 210094, China
  • Received:2007-07-09 Revised:2007-12-10 Online:2008-11-25 Published:2008-11-25

摘要: 采用标量联合的概率密度函数方法,对钝体驻定的湍流射流扩散Sydney火焰HM1进行数值模拟,结合当地自适应建表方法加速化学反应计算,用修正的LRR-IP雷诺应力模型求解速度场.首次对3种不同规模的甲烷化学反应动力学机理进行研究,并与实验数据进行比较,结果表明,模型和反应机理很好地预测了速度场和标量场的变化及局部熄火现象,而考虑反应机理中的C2化学对火焰HM1的影响不大.

关键词: 概率密度函数方法, 当地自适应建表, 钝体驻定扩散火焰, 局部熄火

Abstract: A joint-scalar probability density function (PDF) model is used to simulate bluff-body stabilized turbulent non-premixed Sydney flames HM1. In Situ Adaptive Tabulation (ISAT) algorithm is used to accelerate chemistry calculations. A modified LRR-IP Reynolds stress model is applied to obtain mean flow and turbulent mixing fields. We consider three chemical kinetical schemes for methane chemistry. Simulation results are compared with experimental data. It shows that the model and mechanisms predict flow field, scalar field and local extinction well. C2 chemistry has minor effect on flame HM1.

Key words: probability density function method, in Situ adaptive tabulation, bluff-body stabilized non-premixed fame, local extinction

中图分类号: