不连续冷源布局多孔介质内热流耦合LBM数值模拟

计算物理 ›› 2020, Vol. 37 ›› Issue (4): 431-438.

不连续冷源布局多孔介质内热流耦合LBM数值模拟

万启坤¹, 罗松², 尚文强³, 张莹¹, 刘昊天¹, 朱宝杰¹

1. 南昌大学机电工程学院, 江西南昌 330031;
2. 江西江联能源环保有限公司, 江西南昌 330096;
3. 浙江大学能源工程学院, 浙江杭州 310027

收稿日期:2019-05-14 修回日期:2019-08-11 出版日期:2020-07-25 发布日期:2020-07-25
通讯作者: 张莹(1970-),女,教授,博士生导师,E-mail:yzhan2033@163.com
作者简介:万启坤(1998-),本科生,研究方向为多孔介质内传热传质模拟计算
基金资助:
国家自然科学基金（51566012）、江西省自然科学基金（20181BAB206031）资助项目

Lattice Boltzmann Numerical Simulation of Heat-Flow Coupling in a Square Cavity Filled with Porous Media with Partially Colding Wall Layout

WAN Qikun¹, LUO Song², SHANG Wenqiang³, ZHANG Ying¹, LIU Haotian¹, ZHU Baojie¹

1. School of Mechanical and Electrical Engineering, Nanchang University, Nanchang, Jiangxi 330031, China;
2. Jianglian Energy Environmental Protection Limited Company of Jiangxi, Nanchang, Jiangxi 330096, China;
3. School of Energy Engineering, Zhejiang University, Hangzhou, Zhejiang 310027, China

Received:2019-05-14 Revised:2019-08-11 Online:2020-07-25 Published:2020-07-25

摘要/Abstract

摘要： 为研究不连续冷源边界对内置发热体多孔介质方腔内传热及流动的影响，采用格子Boltzmann方法对REV尺度下多孔介质方腔内的自然对流进行计算，并研究瑞利数（Ra）、达西数（Da）、孔隙度对多孔介质方腔内传热流动的影响.发现Da对方腔内的流体流型影响很大，Da为10^-4时，多孔介质方腔内只有一个涡流，而Da为10^-2时，方腔内有两个涡流.增大Ra、Da、孔隙度可以提高冷源壁面的平均努赛尔数（Nu），增强散热效果，孔隙率对平均Nu影响程度和Da的大小有关.当冷源布置在壁面上方，壁面的平均Nu随Ra的增加剧烈变化，方腔处于高Ra条件下时，将冷源布置在边界的上方可以提高散热效果.6种布置方案中Case 6的散热效果最好.

关键词: LBM, 多孔介质, 自然对流, Nusselt数, 不连续冷源

Abstract: Lattice Boltzmann method is used to simulate natural convection in a cavity fill with porous medium under REV scale. Effects of Rayleigh number, Darcy number and porosity on heat transfer and flow in a square enclosure were studied. It is found that Darcy number has a great influence on fluid flow pattern in the cavity. Increasing Rayleigh number,Darcy number, and porosity enhance the heat dissipation effect. Effect of porosity on average Nusselt number is related to Darcy number. As Darcy number is small, porosity has little effect on average Nusselt number. As Darcy number is great, porosity has a great influence on average Nusselt number. As cold source is placed above the wall, average Nusselt number changes dramatically with the increase of Rayleigh number. Under high Rayleigh number condition, cooling effect is improved by arranging the cold source above the boundory.Among the six schemes, Case 6 has the best heat dissipation effect.

Key words: LBM, porous media, natural convection, Nusselt number, partially colding wall

中图分类号:

TB61⁺1

万启坤, 罗松, 尚文强, 张莹, 刘昊天, 朱宝杰. 不连续冷源布局多孔介质内热流耦合LBM数值模拟[J]. 计算物理, 2020, 37(4): 431-438.

WAN Qikun, LUO Song, SHANG Wenqiang, ZHANG Ying, LIU Haotian, ZHU Baojie. Lattice Boltzmann Numerical Simulation of Heat-Flow Coupling in a Square Cavity Filled with Porous Media with Partially Colding Wall Layout[J]. CHINESE JOURNAL OF COMPUTATIONAL PHYSICS, 2020, 37(4): 431-438.

参考文献

[1] DUBOIS F, LIN C A, TEKITEK M M. Anisotropic thermal lattice Boltzmann simulation of 2D natural convection in a square cavity[J]. Computers and Fluids, 2016, 124:278-287.
[2] JAMI M, MOUFEKKIR F, MEZRHAB A, et al. New thermal MRT lattice Boltzmann method for simulations of convective flows[J]. International Journal of Thermal Sciences, 2016, 100:98-107.
[3] LEI T, MENG X, GUO Z. Lattice Boltzmann study on influence of chemical reaction on mixing of miscible fluids with viscous instability in porous media[J]. Chinese J Comput Phys, 2016, 33(4):399-409.
[4] NITHIARASU P, SEETHARAMU K N, SUNDARARAJAN T. Natural convective heat transfer in a fluid saturated variable porosity medium[J]. International Journal of Heat and Mass Transfer, 1997, 40(16):3955-3967.
[5] BHUVANESWARI M, SIVASANKARAN S, KIM Y J. Effect of aspect ratio on convection in a porous enclosure with partially active thermal walls[J]. Computers and Mathematics with Applications, 2011, 62(10):3844-3856.
[6] LIU Q, HE Y L, LI Q, et al. A multiple-relaxation-time lattice Boltzmann model for convection heat transfer in porous media[J]. International Journal of Heat and Mass Transfer, 2014, 73:761-775.
[7] HU Y, LI D C, SHU S, et al. A multiple-relaxation-time lattice Boltzmann model for the flow and heat transfer in a hydrodynamically and thermally anisotropic porous medium[J]. International Journal of Heat and Mass Transfer, 2017, 104:544-558.
[8] WANG T, GAO Q, CHEN J, et al. Lattice Boltzmann simulation of mixed convection in an enclosure filled with porous medium[J]. Chinese J Comput Phys, 2017, 34(1):39-46.
[9] ZHANG T, CHE D. Double MRT thermal lattice Boltzmann simulation for MHD natural convection of nanofluids in an inclined cavity with four square heat sources[J]. International Journal of Heat and Mass Transfer, 2016, 94:87-100.
[10] GUO Z L, ZHAO T S. A lattice Boltzmann method for convection heat transfer in porous media[J]. Numer Heat Transfer, 2005, 47(2):157-177.
[11] SAEID N H. Conjugate natural convection in a porous enclosure:Effect of conduction in one of the vertical walls[J]. International Journal of Thermal Sciences, 2007, 46(6):531-539.
[12] SETA T, TAKEGOSHI E, OKUI K. Lattice Boltzmann simulation of natural convection in porous media[J]. Mathematics and Computers in Simulation, 2006, 72(2-6):195-200.
[13] WEI Y K, DOU H S, WANG Z D, et al. Simulations of natural convection heat transfer in an enclosure at different Rayleigh number using lattice Boltzmann method[J]. Computers and Fluids, 2016, 124:30-38.
[14] DIXIT H N, BABU V. Simulation of high Rayleigh number natural convection in a square cavity using the lattice Boltzmann method[J]. International Journal of Heat and Mass Transfer, 2006, 49(3):727-739.
[15] SANKAR M, BHUVANESWARI M, SIVASANKARAN S, et al. Buoyancy induced convection in a porous cavity with partially thermally active sidewalls[J]. International Journal of Heat and Mass Transfer, 2011, 54(25-26):0-0.
[16] SUN J C, DU P, LI P S, et al. Natural convection heat transfer in a porous medium with partially thermally active walls used LBM[J]. Chinese J Comput Phys, 2017, 34(5):583-592.
[17] 吴峰, 王刚, 马晓迅. 侧壁不连续边界下多孔介质自然对流数值模拟[J]. 化学工程, 2014, 42(2):18-22+49.
[18] GUO Z L, ZHENG C G, SHI B C. Non-equilibrium extrapolation method for velocity and boundary conditions in the lattice Boltzmann method[J]. Chinese Physics, 2002, 11(4):366.
[19] PENG Y, SHU C, CHEW Y T. Simplified thermal lattice Boltzmann model for incompressible thermal flows[J]. Physical Review E, 2003, 68(2):026701.
[20] NITHIARASU P, RAVINDRAN K. A new semi-implicit time stepping procedure for buoyancy driven flow in a fluid saturated porous medium[J]. Computer Methods in Applied Mechanics and Engineering, 1998, 165(1-4):147-154.